Packging & Delivery
Min Order1 piece
100W Bridgelux high lumen output IP65 waterproof LED floodlight
◆ The light source adopts the integration of imported single high power LED, with the special design of integrating many chips into one lighting source.
◆ The crust in aluminum alloy die casting ensures the efficiency of heat emission, guaranteeing the light a long life span.
◆ The integration of 5mm high strength roughened glass and the housing makes the light work perfectly in the high humidity environments.
◆ New high efficiency constant current driver. Wide range of input voltage: AC95-265V.
◆ No delay start. No waiting. It can reach its normal light as soon as it is turned on. No noise or electrical wave.
◆ Environment friendly and no air pollution. We exert the design of using cold light source. It’s no heat radiation. There is no harm to our eyes and skin. The floodlights do not have lead or any other contamination. It is really environment friendly
Factory, gym, dock, billboard, building, tunnel, landscape, city lighting projects, etc. Outdoor and indoor places.
Warm white: 2700-4000K Pure white: 5000-6500K
Color Rendering Index(CRI)
Safety Notice for Using
◆ Please always use the light out of its package.
◆ Before starting use of the light, please check if the light was damaged during transportation. If any damage is shown, please DO not install or use it.
◆ Any maintenance should be performed by trained professionals only.
◆ Keep packaging materials away from the reach of children and pets.
Risks of suffocation!
◆ Caution: The packaging contains small parts that may be swallowed by children.
◆ Never leave children unattended in the vicinity of the lights and do not allow them to play with electrical devices.
◆ Try to avoid looking directly in the LED beam-especially for extended periods of time. Do not shine the LED light in another person’s eyes.
◆ Never cover the light by other objects.
◆ The products need to re-repair, inspection or special treatment of retirement after service time.
◆ Prior to cleaning the light, make sure it has been disconnected from the power supply.
◆ Use a dry or slightly moistened cloth for cleaning.
◆ Never use any chemicals or abrasives for cleaning.
Used electronic devices must be collected for recycling and can not be deposited together with daily garbage.
◆ This product should be installed by trained electricians.
◆ Check integrality of the products when unpack the packing.
◆ When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces. Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights. Do not kink cables. Output cables should be laid separately and at a distance from other cables.
◆ Proceed by connecting the wiring cables to the luminaries. Usually, the brown (or black) wire is the live wire. Connect it with the terminal marked “L”. The blue wire is Naughty wire, connect it with the terminal marked “N”.
◆ Used only the LED driver included, and do not connect the surface-mounted lights to other loads.